Easy Laser Shaft Alignment
Benefits of using Laser Shaft Alignment:
Having correctly aligned machines reduces the risk of breakdowns. Typical problems
arising from poor machine alignment are:
- LOST PRODUCTION
- LEAKING SEALS
- INCREASED VIBRATION
- HIGHER ENERGY CONSUMPTION
- BEARING FAILURE
- SHAFT BREAKAGE
- COUPLING WEAR
- QUALITY PROBLEMS
There is much to be gained in terms of time and money by adjusting the machines
within the prescribed tolerances. Investing in a laser-based measuring system such
as Easy-Laser® will benefit the company by reducing the cost of spare parts and lost
production. And the working environment is improved at the same time.
Easy Laser D505 Shaft Alignment System
- The rugged aluminium and stainless steel design guarantees stable measurement values and reliable alignment even in the harshest of environments.
- Simple and easy to use – the software guides the user through the entire measurement process
- Measurement values are displayed “live”, which means adjusting the machinery is simple
- All readings can be saved in memory for final documentation, quality assurance and plant machinery warranty purposes
- Future proof! Expandable using software & measurement accessories
- Typical Applications: Pumps, motors, diesel engines, gearboxes, fans & turbines
5 Programs available:
- Horizontal 9-12-3: For alignment of horizontal machines by the 9-12-3 method.
- Softfoot – Easily check the machine is standing evenly on its feet, shows which foot should be corrected
- Thermal Growth Compensation – Compensates for the difference in thermal growth between the machines
- Tolerance Check – Checks the offset and angle values in relation to selected tolerance. Shows graphically when the alignement is within tolerance.
- Measurement Value Filter – Advanced electronic filter function for accurate measurement result even in poor measuring conditions like air turbulence and vibration.
Easy Laser D505 Shaft Alignment System
- Advanced system for a wide range of applications
- Rugged design, easy to use software
- “Live” measurement display, plus on-board memory
- Flexible and easy to mount fixtures for all types of couplings
- Only a mimimum of 40 degree shaft rotation needed for complete measurement
- Extra hardware accessories for difficult applications
- Typical Applications: Horizontal, vertical/flange mounted and cardan-shaft-coupled machines, machine trains (up to ten machines in line)
13 Programs available:
- Horizontal 9-12-3: For alignment of horizontal machines by the 9-12-3 method.
- Softfoot – Easily check the machine is standing evenly on its feet, shows which foot should be corrected
- Thermal Growth Compensation – Compensates for the difference in thermal growth between the machines
- Tolerance Check – Checks the offset and angle values in relation to selected tolerance. Shows graphically when the alignement is within tolerance.
- Measurement Value Filter – Advanced electronic filter function for accurate measurement result even in poor measuring conditions like air turbulence and vibration.
- Easyturn – For the alignment of horizontal machines. Allows complete measurement with only 40 degree rotation of the shafts
- Cardan – Shows angular errors and adjustment value on cardan-shaft-coupled/centre-offset machines (requires accessory fixtures)
- Vertical – For measurement of vertical & flange mounted machines
- Machine Train – For the alignment of between two and ten machines in line (9 couplings). The entire alignment can be followed live on the screen
- Reflock – any pair of feet can be locked/set as a reference.
- Offset & Angle – Shows centre offset and angular error between tow shafts, for example. Also suitable for dynamic measurements
- Values – Shows live readings from S- and M- unit. Can be used for shaft alignment, straightness measurement and dynamic measurement. Up to four detectors can be connected in series and be zeroed individually
- Vibrometer – Shows vibration level in “mm/s” or “inch/s”, and bearing condition value in “g”. The measurement complies with vibration standard ISO10816-3 (Requires Vibrometer probe D283)
- BTA Digital – For alignment of belt and chain drives. (Requires BTA Digital transmitter and detector unit